When should you clean your spa filter?

Filter maintenance is crucial for the performance of your spa.
We recommend rinsing your filters once every 3-4 weeks using the Darlly FilterGuard Cleaner with the Darlly Cyclone Filter Brush (Steps 1 & 2). Click on step numbers below for more information.

Perform a deep clean using the Darlly FilterGuard Sheets 3-4 times a year or when required e.g. after a party or high usage (Steps 1 to 4).

Step 1

FilterGuard Filter Cleaner (SC911)

Add FilterGuard Filter Cleaner fluid to the Cyclone fluid reservoir and attach to the top of your cyclone. Make sure the Cyclone fluid reservoir is 50% - 100% full depending on the size of the filter. 100% being for a large filter down to 50% for a smaller filter.

Step 2

FilterGuard Cyclone Filter Cleaner (SC785)

The Cyclone will attach to any standard garden hose. Use with FilterGuard Filter Cleaner fluid to start cleaning you filter. Squeeze the trigger and use a brushing action to apply fluid and water into the filter pleats to remove any excessive contamination and debris. Rinse the filter with the hose to remove any loosened debris.

Step 3

FilterGuard Cleaning Bucket (SC909)

Expand the bucket and fill with warm water to the top of grey band (Approx 14 litres). Add filter(s) to the bucket after cleaning filter with the FilterGuard Cyclone & Filter Cleaner fluid (Steps 1 & 2).

Step 4

FilterGuard Cleaning Sheets (SC910)

Add the sheets to the warm water, one per 5 litres of water, add filters to water. Stir to dissolve cleaning sheets. Leave to soak for 24 hours, agitate the water and turn the filter occasionally to clean evenly and dislodge loosened dirt. After 24 hours empty the bucket and rinse out the remaining dirt/debris using the Cyclone Filter Cleaner without any filter cleaner liquid in the reservoir. Leave the filter to dry completely.